I have tried lots of sas2flash versions, non of them worked. Sign in Already have an account? This is by no means an all encompassing post for MegaCLI, which is a very powerful tool and has a lot of options to pick from…so proceed carefully. It sounds to me like you’ve done everything you can and the card is just not supported by unRAID. I ended up working around this by doing the following steps: Here is what to do:. Was hoping this wouldn’t be the case.
|Date Added:||12 September 2014|
|File Size:||66.44 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
It will force a single line output and will return exit code 0 if all good, 22208 2 if at least one thing is wrong.
Plan to have Dual Parity drives, and 18TB of total usable space, with a few bays leftover for future expansion. This is by no means an all encompassing post for MegaCLI, which is a very powerful tool and has a lot of options to pick from…so proceed carefully. I downloaded MegaCLI and placed it on my Dropbox folder, this made it easy so I could just use wget on the Linux server after it booted. In this file, is the magic line which stores the SAS address of the card — which is globally unique to the card.
Fill in your details below or click an icon to log in: Any recommendations on what HBA to buy? As I suspected, the HDD backplane on this system seems to be the culprit — unplug it and the card initializes without a problem.
LSI SAS RAID Controller Information and Listing
I apologize if this a bit of 2028 newb question, but I’ve been trying all night and still just can’t seem to get things setup. The script can be called with –nagios parameter. I’m pretty sure the wold also work if it was in IT mode.
Posted January 8, Management and reporting tools 3. However it’s really hard to use because it’s use tones of command line parameters and there’s no documentation. I ended up working around this by doing the following steps:. By continuing to use this website, you agree to their use. Dell cards can be flashed using firmware-tools.
Switching LSI SAS 2208 and similar chipsets to JBOD mode
It means it has detected some RAID informations on it, and thus, considers it as a disk being part of an array that may be imported into current controller configuration. The controller will now recognise the disk as being a “foreign” one.
What did I miss? When I flashed my HP, I had to get the sas2flsh. Good to have it stored in a file, so I can restore it if it gets wiped!
Linux kernel drivers 3. I use this one currently and its supporting eight drives from sizes 3TB up to 8TB, depending on your backplane, it may be all you ldi with the right cables.
LSI MegaRAID SAS
Proceed at your own risk, I recommend verifying that no data will be impacted by this task. The first one is already setup but we have just plugged a disk bays on the second card. From what I lsu see after searching online, there is no “IT Mode” to flash for this chipset. I am not liable for how quickly the -CfgLdDel command obliterates any existing logical volume configuration, proceed at your own risk.
It seems ADRA is deprecated, current megacli binary doesn’t offer this option anymore. It is available in the packages repository too. I have the same motherboard and backplane. Hi I checked your sass out.
Now we’re going to enable write cache. Notify me of new comments via email. If not, it won’t be used to avoid filling cache with randon useless data in case of randomly accessed sector. However, I already did this for you.